Salus standing water analysis
Salus standing water analysis
Salus

Salus standing water analysis

CHF 66.00
Salus Stagnant Water Analysis – Precise Water Analysis for Old and New Buildings

With the Salus Stagnant Water Analysis, you gain insight into the quality of water that remains in the pipes for longer periods (e.g., overnight). This analysis is particularly valuable in older buildings to detect a possible accumulation of metals such as copper and zinc and to ensure that no lead pipes are installed.

  • Analysis in our in-house laboratory: Our environmental and health analyses are carried out under the highest quality standards.
  • Relevant investigation for stagnant water: During stagnation, metals such as copper and zinc can accumulate in the water – a stagnant water analysis reveals how much these values increase.
  • Important health check for old buildings: Stagnant water analysis is particularly recommended in old buildings over 100 years old, as outdated pipes are often present here.
  • Parameters according to the Drinking Water Ordinance: Essential elements such as aluminum, lead, cadmium, iron, copper, nickel, and zinc are tested to ensure that the water poses no health risks.
  • Comparison with fresh water analysis: For a comprehensive assessment, a fresh water analysis is also recommended to get a complete picture of the water quality.

SKU: 121-9803

EAN: 4004148098031

Nährwertangabe:

Sample container, data sheet with instructions, sample analysis, address label.
Salus standing water analysis
CHF 66.00

Sample container, data sheet with instructions, sample analysis, address label.

Important notes on taking stagnant water samples:

1. It would be best to take the sample in the kitchen.
2. Fill the stagnant water sample container completely with cold tap water 3 times and empty it again; under no circumstances fill it more often!
3. Now fill the stagnant water sample container completely and seal it tightly. Ensure the lid is properly seated.
4. Fill out the data sheet.
5. Stick the enclosed address label onto the return package.

Note: sample containers other than those supplied should only be used in exceptional cases. The container material should be polyethylene. Only a brand-new, clean container may be used, as used or unsuitable container material can falsify the analysis results.

Send the collected water samples with the data sheet immediately to:
Salus Haus GmbH & Co. KG
Analytical Service Department
Bahnhofstr. 24
83052 Bruckmühl

Important information on taking samples of standing water: 1. It would be best to take a sample in the kitchen. 2. Fill the standing water sample container completely with water from the cold water pipe three times and then empty it again. Please do not fill it more than that under any circumstances! 3. Now fill the standing water sample container completely and close it tightly. Make sure the lid is correctly seated. 4. Fill out the data sheet. 5. Stick the enclosed address sticker on the return package. Note: sample containers other than those supplied should only be used in exceptional cases. The container material should be polyethylene. Only a brand new, clean container may be used, as used or unsuitable container material can distort the analysis result. Send the water samples taken with the data sheet immediately to: SALUS Haus GmbH & Co. KG Analytischer Service Bahnhofstraße 24 83052 Bruckmühl

Häufig gestellte Fragen

The Salus standing water analysis enables you to precisely check your water quality. This way, you can take targeted measures to improve it and ensure pure water.

Is the application of the Salus Standing Water Analysis easy and user-friendly?

With the Salus Standing Water Analysis, you receive results within a very short time. This allows you to act immediately and ensure that your water is always of the best quality.